ASK A BRAND

The Benefits of Subwoofer Speakers March 27, In theory, you could do without subwoofer speakers, but the audio experience would be thin. Learn the basics of subwoofer speaker system installation. A key piece of car sound system is the choice of car stereo subwoofer speakers. Answer the following questions and you will find the system you need. Once installed into your car, then you should notice a huge difference in sound quality, and when you play your favorite tracks you will enjoy them that much more. Determine the Size of the Available Space Looking at average size of today’s car, it is far smaller than the cars of even a decade ago. It is a task to find the space for a subwoofer speaker system. To determine the space available in your vehicle, look in the trunk area, the most recommended installation spot and doors. The amount of space available in either site will determine the size of the subwoofer. In a small sedan, you will likely find the most available space directly under the rear package shelf at the rear window.

SUBWOOFERS

Before I get started, for reference: In terms of trunk space, both use roughly the same amount and for me this is main issue with any system. With 2 sealed you get more coil for more thermal power handling, but if you need to send more power you could potentially need electrical upgrades etc.

Apr 20,  · I read somewhere that in order to hookup a aftermarket Sub/ Amp to + chargers that you need to tie into the speakers before the amp under the dash on the drivers side of the car?

I am fairly familiar with upgrading audio on cars as I have done so on my last 2. I just had a couple of questions I couldnt find clear answers for on the forums and was hoping you guys could help, you seem like you know your stuff and I trust your opinions. Basically I have a 10″ JL w3 sub in a high output box and an amp i want to install when I get my car, and possibly upgrade the speakers. I got the N head unit touchscreen with Nav from factory I was wondering if i could hook up the amp subs and speakers without messing up any of the audio controls, steering wheel controls, and uconnect and nav functions.

My other 2 cars I used an aftermarket head unit, but i would like to keep this one as i paid for it! Just curious what my options were. Dont want to install if I cant get all of the factory features. I know Chevy factory speakers produce no bass at all and sound like people screaming in a cardboard box into a pillow. So if you have not heard your car yet, I would wait before maybe swapping out the speakers.

Also, you could have ordered it with the factory amp, or you could maybe wire up yours where the factory goes. It lives in a cubby behind the glove box well, really on the side.

hooking up subs and an amp to factory cd/casset player

Here are pictures and info about the visible upgrades to my stereo. Wiring Diagram is at the bottom. Most information is for LSE model, but there are wire colors at the bottom for other models.

About Subwoofers. Kicker’s subwoofers are synonymous with high-quality audio performance. With a history stretching back to , our car subwoofers consistently provide maximum performance and bass to millions of vehicles.

Rev – 26 Dec Basics What exactly does the term “bi-amplification” and “tri-amplification” mean? It means that there are separate amplifiers to drive individual woofers, tweeters, and in the case of tri-amplification, midrange speakers. Why would anyone want to do this? There are lots of attractive advantages: Better overall sound quality. Electronic crossover required allows for easy adjustment of crossover frequency to optimize system performance.

Non linear and lossy effects of passive speaker crossover networks are eliminated big plus for low frequency drivers. Electronic crossover allows excellent performance with very high filter slope cutoff keeps unwanted energy out of speakers that can’t deal with it.

HOW TO: Install amp for subs for ’11 charger

How to Wire an Amp to a Sub and Head Unit A sub woofer or two in a vehicle can make the world of difference in listening to music. It is very important to match the RMS of your subs to your amp. You want an amp more powerful than your sub, because you don’t want your sub to clip. Clipping is the number one reason of bass distortion. Steps 1 Gather your equipment Amp, Subs, Stereo, and wiring.

Apr 22,  · Hook Up Your Own Subs This website teaches you how to hook up car subwoofers on your own as well as tweeters, interior speakers, and car stereo. If you don’t won’t to pay a shop, then you’ve come to the right spot.

Unsubscribe The car amplifier doesn’t provide a signal to the sub I have the most perplexing of issues at hand, and I don’t know where else to turn to but here. My sister’s car — namely, the car’s sub amplifier — is giving me all sorts of sass. I’m trying to diagnose it from a world away she’s in Tennessee, I’m in California and it just does not want to work properly. A bit of background: It powered on briefly the yellow LED on the amp itself turned on, but not the green LED on the subwoofer level controller , but turned off as soon as she hooked up to sub And then it never powered back on again.

So after some brief multi-metering, we chalk it up to a bad amp and she orders this Boss amp from Amazon. Yesterday the amp arrived, and we’re back to square one. These are her installation pictures:

Can I hook up a amp and sub to a stock bose radio?

But what the manufacturer is not showing you is the bandwidth vs. Quality of bass and how well it integrates into a system is paramount. If I have to sacrifice a bit of extension and SPL to achieve this, so be it. The Set-Up I left my EP towards the left front corner behind my couch as it has been for the past 3 years.

I placed one EP on top of it and the other EP diagonally located towards the back right of the room.

Apr 04,  ·: Subwoofer Connection Guide Multi System Audioholics Hookup Diagram Sub Wiring Two Dual Ohm Subs Car Woofer Amplifier Speaker Wire Dvc Kicker Comp Diagrams Hook Voice Coil Amp Listen To Your Customers. They Will Tell You All About Subwoofer Hookup Diagram ~ Sarkarinaukri Forum.

PA-Performance is widely know for their high performance charging and starting systems. They have specialized in high output alternators for the Mustang for nearly a decade. Now this is a amp 6G series alternator that comes complete with an internal voltage regulator and a pulley that allows you to reuse your factory belt. Although, I would recommend replacing your belt while you’re in the area, since you’re going to be replacing your alternator anyway. This is a direct replacement that increases the charging capacity at all rpm ranges without any modification necessary.

Providing amps of idle and amps at max. Now I will say because this unit provides higher than stock output, you will need to upgrade your main power wire.

Reviewing Some of The Best Underseat subwoofers

July 19, Most audio equipment dies for one simple reason. Most people push their equipment beyond its limits. Whether it is the amplifier, subwoofer or full range speakers, clipping is the number one cause of failure.

Jun 28,  · Best Answer: A powered subwoofer like a bazooka tube would be the easiest solution. All it is is a tube with a speaker and built in amp. You hook up a power wire, a ground wire, a remote wire, and a speaker level input and you’re : Resolved.

Sound Ordnance Powered Subs Open a new front for bass Sound Ordnance powered subs bring the forces of good sound to your vehicle at an affordable price. These compact dynamos travel light and hit hard, with a subwoofer and amplifier built into a sturdy enclosure that easily fits into tight spots. B-8P Powered bandpass sub Bandpass subs lay down deep bass that keeps regular subs cowering in their foxholes. The B-8P puts this bass technology to work in a compact design that you can deploy in a corner of your cargo area or trunk, even behind the seat in an extended cab truck.

Preamp- and speaker-level inputs let you hook this sub up to an aftermarket or factory stereo. The rugged enclosure features a clear acrylic window so you can watch your woofer in action, while durable black carpet armors the B-8P from nicks and scrapes. Tune your bass barrage for maximum effect with the variable low-pass filter and phase control. B-8P Compact powered sub If you’re strapped for space, the Sound Ordnance B-8PTD powered subwoofer turns the hard-to-fit spots in your vehicle into potent bass bastions.

The B-8PTD’s built in amp sends watts of digital power to its 8″ woofer, adding high-impact bass reinforcement to your music. Preamp- and speaker-level inputs allow convenient connection to just about any system, plus you can tweak the phase control, bass boost, and low-pass crossover for maximum firepower in your vehicle. A wired remote lets you take command of your bass from the driver’s seat.

does the factory radio have rca outputs for an amp

Let me say right up front that you only need to read this article if you are lucky enough that your group is getting bookings in large or outdoor venues. But if you have a good set of main PA speakers that are starting to sound strained at those large gigs, you might want to think about a next logical step. You can send comments, questions, or scathing diatribes to Larry at lmundy attbi.

As I said at the end of that article, the result worked great.

Home» Car Batteries» What Gauge Wire Do I Need To Hook Up The Battery To The Amp And For The Amp To The 2 Subs. What Gauge Wire Do I Need To Hook Up The Battery To The Amp And For The Amp To The 2 Subs. Auto Dealer Wrecked My Car During Repair.

Whether it’s an installation that might not have gone as planned, or a random problem that comes out of nowhere. Here is a list of your common car stereo problems, symptoms and solutions to help get your stereo up and running! Many Jeeps and Chevrolet systems have a data signal wire that carries a very low voltage signal that tells the OEM Head Unit when to turn on, however; it is not compatible with aftermarket units. If you have a voltage meter or a test light, test the ground black , constant 12v yellow , and accessory 12v red wires to make see if you have the correct voltage in the correct wires, as well as a good ground.

Constant will always be 12v, whether or not your car is on. Make sure to use your ground, as well as another ground like the frame or body of the car while testing your constant and accessory to test that you have a good ground. If you find that one of your power wires or ground wires are not correct, check your vehicle wire diagram and make sure you have the correct corresponding power and ground wires. After finding the location of the fuse, pull it and make sure that the leads are not corroded and that the fuse has not been broken or popped.

Most aftermarket amplifiers have a protection from low and high voltage. Vice versa, if your battery is low and the amplifier is not receiving a constant 12v, it will enter protection mode. Amplifiers will also enter protection mode if there is a short somewhere. If you have a signal RCA wire that is shorting out, this could be your problem so check to see if your RCAs are in-tact and not shorted.

Also, if one of the output channels are shorted out, or you have a blown speaker, many aftermarket amplifiers will enter protection mode. Disconnect all output channels and see if it will return to normal operation.

Installing a stereo amp and 2 subs

This is necessary when one is adding an amplifier to a factory head unit, since factory head units do not have RCA outputs to get signals from. It consists of a transformer and 10 to 20 watts a high-voltage resistor and connects to amp by using RCA patch cable. The amplifier in the head unit is being loaded by the resistor.

This complete amp kit has everything you need to hook up your amplifier to your battery, head-unit, and speakers/subwoofers. QPower manufactures subs and speakers to step up your car audio system. They are known for their subwoofer enclosures, speakers, subwoofers, tweeters, amplifier kits, and accessories. Q POWER 4 Gauge.

To get it right, always keep these points in mind: A car requires a head unit with RCA output to connect to the amp. Speakers and subs will need to have the same output power as that of the channels on the amp. With that in mind, there are a few things that the buyer will need to consider before making that important purchase.

Type of Car Amplifier Car amplifiers are generally broken down into three categories: Single or mono channel amplifiers — These are used for subwoofers. They have a relatively THD, often less or equal to 1 percent. The best unit should also be efficient and come in a small size. See the physical dimensions of every amp from the table.

For interior speaker amps, frankly speaking, the user is always going to run the amplifier at 4 Ohms. For subwoofers, the final impedance should be between ohms.

Please turn JavaScript on and reload the page.

Speaker Connections for proper impedance match A note about amplifiers: You should always use the recommended load for your amplifier. However, if you must use a load other than the recommended load, here is a short guide.

You can hook up 20 subs to a mono amp; BUT you have to co nfigure the speakers by impedance/ohms. if you hook two 2 ohm speakers to a 4 ohm steady amp in parallel you will soon buy a new amp. if you hook 10 speakers in series you will not even get it warm. Each speaker will also divide the available wattage and will not have a lot of power.

Rated at 1, watts, you can comfortably get consistent watts of RMS power going directly to your subwoofer. With this Pioneer amp, you can adjust the subwoofer accordingly from at little as 40 Hz to as much as Hz. The newer amps including this one have a wired bass control module, allowing you to turn the bass level up or down without having to physically go to the amp itself and do it. The speaker level inputs allow you to connect your OEM headunit without having to buy add-on adapters or anything that does not have RCA-inputs.

Some additional specs include: Run 70 watts RMS from all 4 channels at 4 ohms, watts RMS from 2 channels at 4 ohms, or watts from 1 channel at 4 ohms. An excellent amplifier for running component speakers and a non-overpowering subwoofer. You get Kenwood quality and Kenwood low cost with this amplifier. Frequency response varies from 10 Hz to 70 kHz. Signal-to-Noise ratio is 95 dB or greater, giving you pretty good sound levels and not so much background noise.

If you are looking for cost effective, not overpowering amplifier that can power a few car speakers, this model by Pioneer is a fair choice. Running a total of 4 output channels, its rated power ranges from watt amps at 4-ohms, watt amps at 2-ohms, and watt amps at 1-ohm though multiple users have reported an RMS at 1-ohm of around , which is impressive. This amp in particular is made to work perfectly with a subwoofer set.

One of the best-rated amplifiers on Amazon getting a 4.

How to install an amp and sub in your car